Malaysia

Our range of respiratory products offers a number of options which may be used to help reduce the risk of cross  contamination between patients and health care workers in the clinical environment.   View the products and ranges below or make an enquiry if you require any further information.

i-view™ video laryngoscope

infection control iview

The i-view™ is a single-use disposable video laryngoscope with no reusable components and is therefore ideal for use where there are concerns regarding infection control.

Furthermore, i-view™ provides the option of a single-use, disposable video laryngoscope, eliminating the need for reprocessing.

Watch the video below or view the landing page and product page to find out more or contact us if you have a query or require further information.

View the product range   Make an enquiry   Watch the video

TrachSeal™ closed suction systems

infection control trachseal

The use of a closed suction system for infection control maintains a closed breathing system and reduces contamination when clearing the lungs of secretions, whilst maintaining ventilation and minimising contamination.

We offer a range of 24 hour and 72 hour usage depending on patient requirements, and two length options to allow attachment to either endotracheal or tracheostomy tubes.

Watch the video or view the product range to find out more or contact us if you have a query or require further information.

View the product range   Make an enquiry   Watch the video

Breathing filters, HMEs and HMEFs

infection control filters

The only way that a clinician can determine the efficiency and effectiveness of the performance of a breathing filter and HMEF is via independent microbiological test protocols and results. All our filters are tested at specialist microbiology laboratory facilities against clinically relevant bacterial and viral challenge.

Our range of HMEFs combine high filtration efficiency with optimal humidification to provide trusted and proven performance to improve infection control.  

Visit the Filtration and Humidification landing page and product pages to find out more or contact us if you have a query or require further information. 

 Visit the landing page View the product range Make an enquiry

StarMed Respiratory Hoods

infection contorl starmed

The StarMed range of respiratory hoods has been designed for both non-invasive ventilation (NIV) and CPAP therapy providing an alternative patient interface to traditional masks.  The NIV hoods create a closed environment that prevents dispersion from leaks during treatment, improving infection control and the protection of the clinician. 

View the StarMed landing page and product pages for further information or contact us if you have a query or require further information.

Visit the landing page  View the product range  Make an enquiry

FiltaMask™ medium concentration oxygen mask

infection control filtamask

The FiltaMask™ combines an oxygen delivery system with a filter media covering the exhalation ports. FiltaMask™ is intended for use on patients with respiratory infections who may be a source of aerosolised infectious pathogens and who also require supplementary oxygen.

The FiltaMask™ is designed to reduce the risk to paramedics, hospital staff and visitors.

Visit the product page or contact us for further information.

View the product page  Make an enquiry

Self-Sealing in-line T-piece

infection control t-piece

The Cirrus™2 nebuliser is designed to deliver drugs for tracheobronchial deposition.  It is available with a self-sealing T-piece, which enables the nebuliser to be attached (or detached) from the ventilator breathing system without interfering with patient ventilation or inadvertently activating any alarms.

If a Heat and Moisture Exchanging Filter (HMEF) is being used and it is essential this stays in place during nebulisation the T-Piece should be positioned between the HMEF and the patient interface, and every effort should be made to minimise system dead space and monitor ventilation. Monitor the HMEF throughout use and replace if increased resistance or contamination occurs.

Watch the video below or visit the product page or contact us to find out further information.

View the product range   Make and enquiry

Silver Knight™ anti-microbial breathing systems

infection control silver knight

Silver-Knight™ is a range of breathing systems with an anti-microbial additive that inhibits bacterial growth and reduces the risk of cross-infection. It functions as a safe, quick and effective catalyst to deactivate pathogenic bacteria and prevent their proliferation. This technology allows the silver ions to be released in small quantities over time to reduce microbial growth within, and on, the surface of the breathing systems helping to reduce touch contamination and potential cross contamination between patients.

Watch the video below or view the landing page and product pages to find out more or contact us for further information.

Visit the landing page View the product range Make and enquiry

Oral Care

infection control oral care

Ventilator Associated Pneumonia (VAP) causes prolonged intubation and a prolonged stay in intensive care units (ICU) with the associated costs. It is a significant cause of morbidity and mortality in critically unwell patients. A combination of oral care treatments (brushing and suctioning) in a proper oral care protocol means care providers can efficiently prevent oropharyngeal bacterial biofilm build-up. This in turn leads to a reduction of VAP and Hospital Acquired Infections (HAIs) and greatly reduces associated treatment costs.

Watch the video below or view the Oral Care landing page and product page to find out more or contact us if you have a query or require further information.

Visit the landing page  View the product range  Make an enquiry

To find out more about our infection control range or maybe just ask a question please get in touch.

 

Make an enquiry

Back to the top